Filter
Top Products
Bosch Security Systems
Divar | Installation Manual | Introduction EN | 1-4
Associated equipment
A typical system could contain the following components (not included with the
unit):
• A primary monitor for multiscreen monitoring (monitor A).
• A second monitor for spot/alarm monitoring (monitor B).
• Cameras with 1 Vpp composite video outputs.
• 75-ohm BNC connectors and video coaxial cable for connecting the video
signals.
• AC power supply outlet for the unit that allows for secure isolation. (The unit
has no on/off switch for security reasons.)
• A keyboard (KBD-Digital).
• PC for Control Center and Configuration Tool applications.
• Pan/tilt/zoom control units.
• Bosch D9000 series control panels.
• SCSI cable for connection to external storage devices.
• External storage devices (DVAD LP Storage Array or DVAS RAID Storage
Array).
• Video Manager for system expansion.
• ATM/POS bridge for connecting ATM/POS devices.
• Bosch Security Systems external DVD writer for local archiving for Divars
without internal writer.
DVD writer**
The following points should be taken into consideration when using the internal
DVD writer:
• The DVD writer might not support all CD and DVD media. For a list of
approved CD and DVD media (not supplied by Bosch), please visit
www.boschsecuritysystems.com.
• After making an archive with the DVD writer, we advise you to test the CD
or DVD media to verify that the archived data can be played back on a PC.
• To update the Archive Player software that is written to a CD/DVD when a
local archive is made, insert the supplied CD into the DVD writer. The
Divar automatically detects new Archive Player software. Follow the
instructions that appear on your monitor screen to load the latest Archive
Player software.
• The DVD writer supports the following write speeds:
DVD+R / DVD+RW: 4x (or higher)
CD-R: 40x (or higher)
CD-RW: 24x (or higher)