Filter
Top Products
Bosch Security Systems
Divar | Installation Manual | Menu system EN | 5-5
>> LOCAL ARCHIVING
• Segments of recorded video can be written to (re)writable disks using the
local archiving menu.
•Select Archive Setup to check the status of the writer, the progress of the
writing, or to erase or format rewritable disks.
•Select Archive Session to make a list of the video segments to be
archived and to start writing.
>>> Archive Setup
• Progress is shown as a percentage of the current activity.
•Select Cancel Archiving (or press F2) to stop the current archive
session (this can result in an unusable disk).
•Set Finalize to Yes if the disk is to be finalized after archiving.
•Select Erase Rewritable to remove all data from a rewritable disk.
• Free Space shows the free space available on the inserted disk.
>>> Archiving Session
• Fill in a begin and end, date and time for the video segment you
wish to archive. Select Add to Archive List (or press F2) to place it
in the list. All recorded cameras in the time span are selected.
•Select View Archive List to review the selected video segments and
to start the archiving procedure.
• The archive list is saved until archiving is carried out. Video
segments that have been partially overwritten or deleted are
removed from the list.
View Archive List
• To remove a video segment from the list, select it with the arrow
keys and press F2.
•Select Start Archiving to write the video segments to disk.
• If the total size is greater than the disk capacity, then only the first
segments that fit are archived. Those segments that are not archived
remain in the list so that they can be archived to a new disk.
Add to Archive List
• Fill in a begin and end, date and time for the video segment you
wish to archive. Select Add to Archive List (or press F2) to place it
in the list. All recorded cameras in the time span are selected.
>>> Finalize
•Set Finalize to Yes if the disk is to be finalized after archiving.
• If a disk is not finalized it can be used for multiple sessions. If
finalized, older CD players can read it but new sessions cannot be
added anymore.
>> PROTECTED RECORDINGS
• Move to a protected recording in the list and press the select key to
play it back.
• Press the escape key to stop playback and return to the list.
• Auto-protected recordings are indicated by a ! after the entry in the list.
• To remove the protection of a recording, move to it in the list and press
F2. You must fill in a password (if configured) and confirm before the
recording is unprotected.
•Select Add to Archive List (or press F1) to place a protected recoding in
the archive list.
• Recordings to be archived are indicated by an A.