Cary Audio Design HD1080P DVD Player User Manual


 
CONTROLS AND DISPLAYS
13
REAR PANEL
1. RIGHT CHANNEL ANALOG OUTPUT JACK (AES/EBU Balanced)
Use this jack for connection to the amplifier's right channel balanced input jack.
2. RIGHT CHANNEL ANALOG OUTPUT JACK (RCA Unbalanced)
Use this jack for connection to the amplifier's RCA right channel unbalanced input jack.
3. LEFT CHANNEL ANALOG OUTPUT JACK (RCA Unbalanced)
Use this jack for connection to the amplifier's RCA left channel unbalanced input jack.
4. LEFT CHANNEL ANALOG OUTPUT JACK (AES/EBU Balanced)
Use this jack for connection to the amplifier's left channel balanced input jack.
5. HDMI OUTPUT JACK
Use this jack to connect to a TV, Monitor or AV receiver that has an HDMI input.
6. 480p-1080p PROGRESSIVE COMPONENT VIDEO OUTPUT JACKS
Use these jacks to connect to a TV, Monitor or AV receiver that has progressive
component video capability and inputs. The connectors used for this are BNC
connections. BNC > RCA adapters are available if your display uses RCA connections.
7. RGB+HV SYNC VIDEO OUTPUT JACKS
Use these jacks to connect to a TV, Monitor or AV receiver that has RGB+HV SYNC
video inputs. These are BNC connections. Consult your dealer about matching cables.
8. 480i INTERLACED COMPONENT VIDEO OUTPUT JACKS
Use these jacks to connect to a TV, Monitor or AV receiver that has interlaced
component video capability and inputs. The outputs for this section use RCA
connections, with 75 Ohm cable (not included).
9. S-VIDEO OUTPUT JACK
Use this jack to connect to a TV, Monitor or AV receiver that has an S-VIDEO input. An
S-video cable is needed to use this connection (not included).