Filter
Top Products
CHANGING THE DEFAULT SETTINGS
21
• Brightness
The Brightness control could also be called the black level control. It adds or subtracts
an offset, or bias, into the red, green, and blue signals. This should be adjusted so that
black picture content displays as true black on your video display. Incorrect adjustment
of this control is the most common problem of poor quality picture reproduction on
video displays. Set the brightness control first, and then adjust the Contrast control.
• Color
Adjusts the intensity of the color levels on the screen.
...........................................................................................................................................................................
ANGLE MARK
Use this to set the MULTI-ANGLE camera scenes on DVD
Discs.
ON (Factory default)
Select this if you prefer to see the camera icon on-screen
during multi-angle camera scenes on DVD discs.
OFF
Turns off the angle mark on screen.
...........................................................................................................................................................................
CAPTIONS
Use this to set whether of not to display the closed captions
recorded on DVDs.
ON
Select this to display the captions on the screen when
playing DVDs containing English captions.
OFF (Factory default)
Select this when you do not want captions playing on the
screen during DVDs that contain English captions.
...........................................................................................................................................................................
SCREEN SAVER
Use this to make sure a constant image is not displayed for
too long a time, possibly creating “Burn In” on the video
display.
ON (Factory default)
If a constant image is displayed on a plasma or a
conventional CRT type TV, it can “burn in” leaving a
ghost image on the screen.
OFF
Turns off the screen saver function for the DVD 7. Burn in is possible with some video
displays in this setting. Screen saver ON is recommended.