Filter
Top Products
6-41
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-29225-01
Chapter 6 Configuring Radio Settings
Viewing VoWLAN Metrics
Figure 6-9 Voice QoS Settings
Configuring Voice Fault Settings
You can use WLSE Faults > Manage Fault Settings screen to enable fault generation and specify the
priority of the faults generated.
To configure fault settings, follow these steps:
Step 1 Log in to a WLSE.
Step 2 Click the Faults tab.
Step 3 Click Manage Fault Settings.
Step 4 Choose the priority of the faults generated if QoS is red (fair) from the corresponding drop-down list.
Step 5 Click Apply when done.
In the example in Figure 6-8, the system generates P1 faults when QoS is degraded and P3 faults when
QoS is fair. If QoS is green, the system clears the faults generated.
Figure 6-10 Fault Settings