Filter
Top Products
12-12
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-29225-01
Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intrusion Detection
Configuring WDS
Figure 12-7 WDS Server Groups Page
Step 10
Create a group of servers to be used for 802.1x authentication for the infrastructure devices (access
points) that use the WDS access point. Enter a group name in the Server Group Name field.
Step 11 Select the primary server from the Priority 1 drop-down list. (If a server that you need to add to the group
does not appear in the Priority drop-down lists, click Define Servers to browse to the Server Manager
page. Configure the server there, and then return to the WDS Server Groups page.)
Note If you do not have an authentication server on your network, you can configure an access point
or an ISR as a local authentication server.
Step 12 (Optional) Select backup servers from the Priority 2 and 3 drop-down lists.
Step 13 Click Apply.