2-4
User Guide for Cisco LCD Professional Series Displays
OL-17986-01
Chapter 2 The Basics
Getting to Know Your Cisco LCD Professional Series Display
About Terminals on the Back of Your Display
Figure 2-2 Back—All Display Sizes
A recessed area on the back of your display partially hides the power switch, the Kensington slot, the
electrical socket, and the terminals where you connect signal cables. A large white sticker clearly
identifies each available feature in this area. Feature availability varies among different display models
but your display is likely to have at least these:
• Power Switch — Turns your display on and off.
• Power In — The power cord plugs into the LCD display and the wall plug.
• RS232C Out/In — RS232C serial port.
• DVI/HDMI In — DVI/HDMI audio input terminal.
• DVI/HDMI In — Use an HDMI cable to connect this HDMI input terminal to the HDMI output
terminal on another device.
• A/V In [VIDEO] video connection terminal — Use a video cable to connect this input terminal to
the video output terminal on another device.
• A/V Audio In — Audio input terminal.
• A/V Audio Out — Audio output terminal.
• RGB Out.