Filter
Top Products
4-4
User Guide for Cisco LCD Professional Series Displays
OL-17986-01
Chapter 4 Adjusting Display Settings
Using the Picture Menu
Personalizing Picture Settings with the Custom Menu
You can customize contrast, brightness, sharpness, color, and tint settings.
Before You Begin
• This feature is available only when Dynamic Contrast mode is turned off.
• This procedure assumes that your remote control and the front panel controls on your LCD display
are not locked.
Procedure
Step 1 From the main menu, choose Picture > Custom.
Step 2 Choose the setting that you will adjust: Color, Brightness, Sharpness, Color, or Tint.
Step 3 To adjust the setting, push the Left or Right button.
Step 4 To save your selections and implement them, push Enter.
Related Topics
• Locking Front Panel Controls and the Remote Control, page 2-7
• Turning Automatic Contrast Optimation On or Off from the Dynamic Contrast Menu, page 4-6
Choosing a Color Tone Definition from the Color Tone Menu
You can choose which overall tone your display applies to colors.
Before You Begin
• This procedure assumes that your remote control and the front panel controls on your LCD display
are not locked.
• This feature is available only when Dynamic Contrast mode is turned off.
• When you choose any option for Color Tone except ‘Off,’ the Color Temp feature is disabled.
• When you choose the ‘Off’ option for Color Tone, the Color Control feature is disabled.
Procedure
Step 1 From the main menu, choose Picture > Color Tone.
Step 2 To choose a tone definition, use the Up and Down buttons.
These are the tone definitions:
• Off
• Cool2
• Cool1
• Normal