Filter
Top Products
OPERATIONS
VXZ768R 19
English
Radio Operations
Listening to the radio
1. Press the [SRC] button and select the radio
mode. The frequency or PS appears in the
display.
• PS: Programme service name
2. Press the [BND] button and select the radio
band. Each time the button is pressed, the
radio reception band changes in the following
order:
FM1 ➜ FM2 ➜ FM3 ➜ AM (MW/LW) ➜
FM1...
3. Move the [ ] / [ ] lever to tune in the
desired station.
Tuning
There are 3 types of tuning modes available,
seek, manual and preset tuning.
Seek tuning
1. Press the [BND] button and select the
desired band (FM or AM (MW, LW)).
2. Tune into a station.
•If “MANU” is lit in the display, press and hold the
[BND] button for 1 second or longer. “MANU” in
the display goes off and seek tuning is now
available.
•If “TA” is lit in the display, TP stations are
automatically sought.
zDX SEEK
1. Move the [ ] / [ ] lever to automatically
seek a station.
2. When the lever is moved up, the station is
sought in the direction of higher frequencies;
if the lever is moved down, the station is
sought in the direction of lower frequencies.
• When seek tuning starts, “DX SEEK” appears in
the display.
zLOCAL SEEK
1. Move the [ ] / [ ] lever for 1 second or
longer and local seek tuning is carried out.
Broadcast stations with good reception
sensitivity are selected.
• When local seeking starts, “LO SEEK” appears in
the display.
Manual tuning
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the
frequency changes one step at a time. In the
quick tuning mode, you can quickly tune the
desired frequency.
1. Press the [BND] button and select the
desired band (FM or AM (MW/LW)).
•If “MANU” is not lit in the display, press and hold
the [BND] button for 1 second or longer. “MANU”
is lit in the display and manual tuning is now
available.
2. Tune into a station.
zQuick tuning:
1. Move the [ ] / [ ] lever for 1 second or
longer to tune in a station.
zStep tuning:
1. Move the [ ] / [ ] lever to manually tune
in a station.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2,
6-FM3, 6-AM) exists to store individual radio
stations in memory. Pressing the corresponding
[DIRECT] button recalls the stored radio
frequency automatically.
1. Press the [BND] button and select the
desired band (FM or AM (MW/LW)).
2. Press the corresponding [DIRECT] button to
recall the stored station.
• Press and hold one of the [DIRECT] buttons for 2
seconds or longer to store that station into preset
memory.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into preset memory.
VXZ768R.book Page 19 Tuesday, December 27, 2005 10:08 PM