Filter
Top Products
OPERATIONS OF ACCESSORIES
VXZ768R 53
English
Recalling a preset programme
1. Press the [SRC] button to select the DAB
mode.
2. Press the [BND] button. Each time you press
the [BND] button, the display changes in the
following order:
[M1] ➜ [M2] ➜ [M3] ➜ [M1]...
3. Press one of the [DIRECT] buttons to recall a
preset programme.
Note:
•
Press and hold the [DIRECT] button for 2 seconds
or longer to store the programme currently being
received. (Manual memory)
AF function
The AF function switches to a different
frequency on the same network in order to
maintain optimum reception.
• The factory default setting is “ON”
• If the reception of the current broadcast station
deteriorates, “SEARCH” appears in the display
and the radio searches for the same programme
on another frequency.
• For details on “AF function”, refer to the section
“RDS Operations” of each owner’s manual.
zSwitching OFF the AF function (P. 21)
zSwitching ON the AF function (P. 21)
zAF function between RDS and DAB
(P. 21)
When the same programme is broadcast by
both RDS and DAB, and this function is ON, the
main unit switches to receiving the broadcast
with the better reception automatically.
TA (Traffic Announcement)
In the TA standby mode, when a traffic
announcement broadcast starts, the traffic
announcement broadcast is received as top
priority regardless of the function mode. Traffic
programme (TP) automatic tuning is also
possible.
• This function can only be used when “TP” is lit in
the display. When “TP” is lit, this means that the
DAB or RDS broadcast station being received has
traffic announcement programmes.
• For details on “TA”, refer to the section “RDS
Operations” of each owner’s manual.
zSetting the TA standby mode (P. 22)
zCancelling the TA standby mode (P. 22)
zSearching for a TP station (P. 22)
Notes:
•
If a TP station is not received, the main unit stops
the search operation.
•
“TP” may be lit in the display when a TP broadcast
is transmitted from an RDS station. In this case,
press the [TA] button to perform TP seek tuning.
Press the [TA] button again to return to the
previous mode.
INFO (Announcement)
In the INFO standby mode, when the selected
announcement programme starts, the main unit
switches to the selected announcement
programme automatically.
zSetting the INFO standby mode
1. Press and hold the [TA] button for 1 second
or longer.
“INFO” lights in the display and the main unit
is set into the INFO standby mode until the
selected announcement is broadcast.
2. When the selected announcement broadcast
starts, the announcement item appears in the
display.
3. To cancel the selected announcement
broadcast reception, press and hold the [TA]
button for 1 second or longer while the
selected announcement broadcast is being
received.
The selected announcement broadcast
reception is cancelled and the main unit goes
into the INFO standby mode.
zCancelling INFO standby mode
1. To cancel the INFO standby mode, press and
hold the [TA] button for 1 second or longer or
press the [SRC] button.
VXZ768R.book Page 53 Tuesday, December 27, 2005 10:08 PM