Filter
Top Products
OPERATIONS
VXZ768R 41
English
Adjusting the speaker delay time
The time necessary for sound to travel from
speakers to a listener differs depending on the
speaker location or the car size. By adjusting
the delay time of each speaker, you can hear
the sound from the front speakers and the other
speakers simultaneously.
• The factory default setting is “0 ms”.
1. Following the steps 1 to 3 in “Selecting the
monitor menu”, select “DELAY” from
“AUDIO SETUP”.
2. Press the “ ” button to display the DELAY
screen.
3. Press “ ” or “ ” buttons to select the item.
Each time you press the buttons, you can
switch between center and surround
speakers.
4. Press “ ” button to go to the right pane.
5. Press “ ” or “ ” buttons to adjust the delay
time. The delay time ranges from “0ms” to
“15 ms” when you select “CENTER-SP” or
“SRD-SP”.
6. Press the [ENT] button.
Adjusting the dynamic range
This function allows you to adjust the dynamic
range, the ratio of the loudest sounds to the
quietest sounds.
• The factory default setting is “OFF”.
1. Following the steps 1 to 3 in “Selecting the
monitor menu”, select “DRC” from “AUDIO
SETUP”.
2. Press “ ” button to go to the right pane.
3. Press “ ” or “ ” buttons to select the
setting. You can select the dynamic range
from “ON” or “OFF”.
4. Press the [ENT] button.
CENTER-SP
SRD-SP
AUDIO SETUP
DELAY >
SP-GAIN >
SPEAKER-SEL >
PRESS RIGHT TO SELECT
DRC OFF
Dolby PL ON
DELAY
PRESS RIGHT TO SELECT
SRD-SP 0ms
CENTER-SP 0ms
AUDIO SETUP
PRESS ENTER TO SELECT
CENTER-SP ON
DRC OFF
VXZ768R.book Page 41 Tuesday, December 27, 2005 10:08 PM