Filter
Top Products
OPERATIONS
22 VXZ768R
English
TA (Traffic Announcement)
In the TA standby mode, when a traffic
announcement broadcast starts, the traffic
announcement broadcast is received as top
priority regardless of the function mode so you
can listen to it. Traffic programme (TP)
automatic tuning is also possible.
• This function can only be used when “TP” is lit in
the display. When “TP” is lit, this means that the
RDS broadcast station being received has traffic
announcement programmes.
zSetting the TA standby mode
1. Press the [TA] button when only “TP” is lit in
the display.
“TP” and “TA” light in the display and the unit
is set into the TA standby mode until a traffic
announcement is broadcast.
2. When a traffic announcement broadcast
starts,
“TRA INFO” appears in the display.
3. Press the [TA] button while a traffic
announcement broadcast is being received,
the traffic announcement broadcast reception
is cancelled.
The unit goes into the TA standby mode.
zCancelling the TA standby mode
1. As “TP” and “TA” lit in the display, press the
[TA] button or [SRC] button.
The
“TA” in the display goes off and the TA
standby mode is cancelled.
•If “TP” is not lit, pressing the [TA] button searches
for a TP station.
zSearching for a TP station
1. Press the [TA] button when “TP” is not lit in
the display.
2.
“TA” lights in the display and the unit
automatically receives a TP station by
“TP
SEEK”.
Note:
•
If a TP station is not received, the unit continues
the search operation. Pressing [TA] button again
goes off
“
TA” in the display and stops TP station
searching.
Auto store function for TP stations
You can automatically store up to 6 TP stations
into preset memory. If the number of TP can be
received less than 6, broadcast stations already
stored in memory and left without being
overwritten.
1. As
“TA” lit in the display, press and hold the
[PS/AS] button for 2 seconds or longer.
The TP stations with the good reception
sensitivity are stored into preset memory.
• Even if you select FM1 or FM2, a TP station is
stored into memory for FM3.
PTY
This function enables you to listen to a
broadcast of the selected programme type even
if the unit is on a function mode other than radio.
• The factory default setting is “OFF”.
• Some countries do not yet have PTY broadcast.
• In the TA standby mode, a TP station has priority
over a PTY broadcast station.
zSetting/Cancelling the PTY standby
mode
1. Press and hold the [ADJ] button for 1 second
or longer to switch to the RDS mode.
2. Move the [ ] / [ ] lever to select
“PTY”.
3. Turn the [ROTARY] knob to select
“ON” or
“OFF”.
• You cannot select “ON” or “OFF” during a TA,
ALARM or PTY interrupt.
zON:
“PTY” is lit in the display and the PTY standby
mode turns on.
zOFF:
“PTY” goes off in the display and the PTY
standby mode turns off.
4. Press the [ADJ] button to return to the
previous mode.
zCancelling a PTY interrupt broadcast
1. Press the [TA] button or [SRC] button during
the PTY broadcast.
The PTY interrupt is cancelled and the unit
returns to PTY standby mode.
VXZ768R.book Page 22 Tuesday, December 27, 2005 10:08 PM