Filter
Top Products
OPERATIONS OF ACCESSORIES
54 VXZ768R
English
zInformation select
This is a function for selecting INFORMATION
ON or OFF in the Information interrupt mode.
You can set ON up to 6 information items.
You can select any of the 6 items below:
1. Perform the following operation depending on
the connected model.
Press and hold the [ADJ] button for 1 second
or longer to switch to the RDS mode.
2. Move the [ ] / [ ] lever to select “INFO
SEL”: VCD indication, then press the [ ]
button to enter the INFO select mode.
3. Move the [ ] / [ ] lever to select an
information item. You can select any of 6
items:
Travel ➜ Warning ➜ News ➜ Weather ➜
Event ➜ Special ➜ Travel ➜ ...
4. Turn the [ROTARY] knob to set the
information item for ON or OFF.
5. Press the [ ] button to store the setting.
6. Press the [ADJ] button to return to the
previous display.
PTY
This function enables you to listen to the
selected programme type, irrespective of the
function mode.
• One common PTY can be selected for DAB or
RDS.
• Of DAB PTY and RDS PTY, the PTY which is
received earlier takes priority over the other.
• PTY broadcasts are not yet available in all
countries.
• In the INFO standby mode, INFO stations have
priority over PTY stations.
• In the TA standby mode, TP stations have priority
over PTY stations.
• For details on “PTY”, refer to the section “RDS
Operations” of each owner’s manual.
zSetting the PTY standby mode (P. 22)
zCancelling the PTY standby mode (P. 22)
zCancelling a PTY interrupt broadcast
(P. 22)
zSelecting PTY (P. 23)
zPTY seek (P. 23)
zPTY preset memory (P. 23)
Emergency broadcast
When an emergency broadcast is received, all
the function mode operations are stopped.
“ALARM” appears in the display and the
emergency broadcast can be heard.
• For details on “Emergency broadcast”, refer to
the section “RDS Operations” of each owner’s
manual.
zCancelling an emergency broadcast
(P. 23)
Switching the PTY and INFO display
language
You can select one of 4 languages (English,
German, Swedish or French) for the PTY and
INFO shown in the display.
• The factory default setting is “ENGLISH”.
• For details on “Switching the PTY display
language” (P. 24), refer to the section “RDS
Operations” of each owner’s manual.
Volume setting of TA, INFO,
emergency broadcast (ALARM) and
PTY
The volume for TA, INFO, ALARM and PTY
interrupts can be set during TA, INFO, ALARM
and PTY interrupt. Perform the following
operation depending on the connected model.
• The factory default setting is “15”.
1. During a TA, INFO, ALARM or PTY interrupt,
turn the [ROTARY] knob to set the volume to
a desired level (0 to 33).
• When the TA, INFO, ALARM or PTY interrupt
ends, the volume returns to the level it had before
the interrupt.
INFORMATION item
ENGLISH Contents
Travel Transport flash
Warning Warning / Service
News News flash
Weather Area weather flash
Event Event announcement
Special Special event
VXZ768R.book Page 54 Tuesday, December 27, 2005 10:08 PM