Filter
Top Products
7. Setup
7-6.3. All Motion ON / OFF, Sensitivity and Velocity Setting
▫ Click the
button in the RECORD menu and the ALL MOTION setup pop-up
window will be displayed as shown in Fig.7-59.
▫ By clicking the mouse, select the
on the pop-up window (See
Fig.7-59) to enable the system to start recording by motion detection for all the channels.
▫ By clicking the mouse, select the
on the pop-up window (See
Fig.7-59) to disable the system to start recording by motion detection for all the channels.
▫ By clicking the mouse, select the
on the pop-up window
(See Fig.7-59) and choose one of the sensitivity among LOW, 1, 2, 3 and HIGH for all the
channels with the mouse’s wheel, and then click it to save.
▫ By clicking the mouse, select the
on the pop-up window (See
Fig.7-59) and choose one of the velocity among LOW, 1, 2, 3 and HIGH with the mouse’s
wheel, and then click it to save.
▫ See section 6-8.1 through 6-8.5 on page 53 through 56 for more information related to
recording.
[Fig.7-58 All Motion Setup button]
Fig.7-59 All Motion Setup pop-up window
[Fig.7-60 All Motion Sensitivity setup button]
101