Filter
Top Products
8. Remote Host Program
8-4.2. Connection
There are two ways to access the DVR through the SmViewer as follows.
▫ With Set Direct setting
- Click the “CONNECT” button on the SmViewer and the SmViewer will be displayed.
- Click the mouse on the “Set Direct” in the Connect Dialog menu and click the “EDIT” button
and enter the IP address and Port number, which must be the same as DVR has. Click the
“EDIT” button again and the connection list will be created in the Name List (up to 20 lists).
- Choose a Site Name in the Name Lists and then click the “CONNECT” button In order to
access the DVR.
▫ With Get Server setting
- Click the “CONNECT” button on the SmViewer and the SmViewer will be displayed.
- Click the mouse on the “Get Server” in the Connect Dialog menu and click the “EDIT”
button and enter the IP address, Port number and Site Name, which must be the same as
DVR has (SETUP-click NETWORK-click MNS in the NETWORK menu: Refer to section 7-
7.5 MNS on page 120). Click the “EDIT” button again and the connection list will be created
in the Name Lists (up to 20 lists).
- Choose a Site Name in the Name Lists and then click the “CONNECT” button in order to
access the DVR.
[Fig.8-8 Connect Dialog]
137