Clover Electronics CDR0850 DVR User Manual


 
7. Setup
7-7. NETWORK
Click the “NETWORK” button in the SETUP menu and the NETWORK menu will be
displayed on the screen as shown in Fig.7-94.
Click the (EXIT) button to return to the SETUP menu.
[Fig.7-94 NETWORK menu]
7-7.1. IP Mode
There are two kinds of IP MODE, “DYNAMIC IP” and “STATIC-IP” in the NETWORK menu.
DYNAMIC IP: automatically receives IP address from the router or gateway. With Dynamic IP,
It doesn’t need to enter the GATEWAY ADDRESS, SUBNET MASK, IP ADDRESS.
STATIC IP: requires you to enter the GATEWAY ADDRESS, SUBNET MASK, IP ADDRESS.
Click the
“IP MODE” button in the NETWORK menu and the IP mode pop-up window will be
displayed on the screen (See Fig.7-96).
Select the STATIC or DYNAMIC by clicking the mouse, pressing the buttons on the front
panel or remote controller depends on your networking.
117