Filter
Top Products
Stand-alone DVR Instruction Manual
7-2.3. PASSWORD
▫ ON/OFF
Select ON or OFF by clicking the mouse.
If the ON is selected, the password has to be entered to get into the SETUP mode,
RECORD mode, COPY mode, REPLAY mode, and when trying to connect the network
through the SmViewer.
▫ PASSWORD CHANGE
Click the password “********” button and the On Screen Keyboard will be displayed as
shown in Fig.7-17. The factory default password is “11111111”.
Delete the existing password with the
button on the On Screen Keyboard. Enter the
new password by using the On Screen Keyboard and click on the OK button to save. The
password should be 8 digits.
If you executed the factory default setting, the existing password will be changed to
“11111111”.
[Fig.7-17 PASSWORD KEYBOARD window]
Note: Don’t forget the password.
82