Clover Electronics CDR0850 DVR User Manual


 
Stand-alone DVR Instruction Manual
7-2.2. SYSTEM CONFIG
Click the “SYSTEM CONFIG” button in the SYSTEM menu, and the SYSTEM CONFIG
menu will be displayed (See Fig.7-10).
Click the “EXIT” button to return to the SYSTEM menu.
[Fig.7-10 SYSTEM CONFIG]
7-2.2.1. FACTORY DEFAULT
Click the “FACTORY DEFAULT” button in the SYSTEM CONFIG menu, and you will be
asked as shown in Fig.7-12.
[Fig.7-11 Factory Default button]
Click the “OK” button in Fig.7-12 to reset to the Factory Default Values, and then the
system will save the factory default values (settings).
Click the CANCEL button to cancel.
78