Filter
Top Products
Page 44 Coby Electronics Corporation
TV Mode (Analog TV)
Set the unit to TV mode to view analog NTSC TV broadcasts.
Press to switch the unit to TV mode. (You can also press
to toggle quickly between DTV and TV modes.)
NTSC television broadcasts will cease in the USA on
February 17, 2009. To receive over-the-air television
broadcasts after this date, use the digital ATSC tuner
(DTV mode).
Basic Operation
Ensure that all cable connections have been made properly
and securely (refer to the section “Cable Connections” for
details).
Press to turn the unit on or off.
Press until the screen displays “TV” to enter TV
mode.
If this is the rst time you are using the unit, use the TV
setup menu to auto-search for TV channels within broadcast
range (please see the section “TV Setup” for details).
Press or to adjust the volume level.
Press to disable the sound completely. To restore
the sound, press again.
Press or to scan through the available TV chan-
nels.
Press to return to the previously selected chan-
nel.
1.
2.
3.
4.
5.
•
6.
•