Filter
Top Products
Waterproof Wireless Handheld Remote Crestron WPR-48
“WPR48 Configuration” Window
4. Select one of the “Load . .” buttons to display either the default
configuration values, the current values stored in the WPR-48 in the
docking station, or the values saved in a file on the PC. When you select the
Load From File button, the Viewport displays an “Open” window that
allows you to browse to find the desired file.
The default values for the RF configuration are: RF Remote, RF ID 10, 433
MHz, 27 Buttons, 100% Backlight Brightness, 10 second Backlight
Timeout, unchecked “Allow key presses. . .”
If you select Load From Device and the device contains disallowed
configuration settings, they will be replaced by default values and an error
message will be displayed.
5. The Remote Type area lets you specify whether the WPR-48 will function
as an RF or an IR device, and lets you assign the unit’s corresponding RF or
IR ID number. (The number(s) must correspond with the numbers set in the
SIMPL program.)
8 • Waterproof Wireless Handheld Remote: WPR-48 Operations Guide – DOC. 6254A