Filter
Top Products
23
VCR Operation
22
Tuning in New Stations
Tuning
VCR Playback
Press [ ] button to power on.
Press [VCR] button of remote control to change into VCR mode.
Insert the desired tape.
If you want to playback it, press [PLAY/PAUSE] button.
When the operational status is flickering or poor, adjust it with [TRACKING +/–] button.
1
2
3
To stop it, press [ ] button.
For pause, press [PLAY/PAUSE] button in playback mode.
If you press this button once more, it starts playback again.
4
Press [EJECT] button in the front part or [OPEN/CLOSE] button on
remote control to remove the tape.
5
Various Playback Methods
■ If you want fast forward (or reverse) playback, press [
√√√√
] or [
œœœœ
] button in
Playback mode. You can watch fast playing (rewinding) screen.
■ If you want Still picture, press [PLAY/PAUSE] in Playback mode. You can watch the
desired screen in pause status.
■ If you want slow-motion playback, press [ ❚
√√
] button in Playback mode. You can
watch the desired screen in the slow forward playback.
* NOTE: VCR doesn’t have Slow Reverse Playback function.
■ If you want to watch a series of screens one by one (FRAME ADVANCE), press [❚
√√
]
button in Pause mode. Each time you press this button, the picture advances one frame.
If the product, which has
a auto-detector, detects
a contaminated head(s),
it shows the conditions
to notice the
contamination on
screen.
* In case of the notice
on screen, please rub
the heads with a head-
cleaner followed by
“How to use a head-
cleaner”.
To Adjust Display
This product includes automatic Tracking function and enables users to enjoy clear picture without
an additional operation. Provided that the following problems can be solved by the manual
adjustment, which improves display quality. (During automatic display adjustment, “Adjusting
Display” are displayed on TV screen.)
- If the screen is poor in Playback mode,
- If noises occur in the upper or lower part of screen in slow playback mode,
- If paused picture vibrates up and down.
Use [TRACKING +/–] buttons of remote control to adjust the display suitable for watching.
■ The TV and player are switched on.
■ To see the picture from your player, press the station button on the TV reserved for player input or the AV
(Audio / Video) button.
■ "AV1/2" should not be selected with the AV button on the player.
To complete the set-up of your video recorder when the auto set
has not stored all of the channels or when you wish to store a new
channel.
Call the video’s "SETUP", choose "PR PRESET".
1
Select "MANUAL SET".
2
Choose any unused location number "----" or "P-xx" ...
It's simplest to use the same location number on both the TV and
video.
... and confirm.
3
Set the station you want:
• the programme location number;
• the broadcast system you want (Aerial(CH) or Cable(CC)),
• You can directly enter the real channel number with the [0 to 9]
buttons, or search by pressing [
œ/√
],
• The fine tuning you can adjust,
• When the program is encoded (and you have a decoder
connected to socket EURO AV2), press the [
œ
or
√
] to select
ON or OFF.
• Change or create the station name.
4
Once you see the station you want, store it.
Tune in further stations (from step 3 onwards) or exit tuning mode.
5
PR PRESET
AUTO SET
MANUAL SET
PR ERASE
PR ALIGN
…/†:SELECT
OK:CONFIRM SETUP:END
MANUAL SET
…/†: UP/DOWN
œ/√:SELECT
OK:CONFIRM SETUP:END
MANUAL SET
PR01 ARD PR08 P-08
PR02 ZDF PR09 P-09
PR03 P-03 PR10 P-10
PR04 P-04 PR11 P-11
PR05 MTV PR12 ----
PR06 P-06 PR13 ----
PR07 P-07 PR14 ----
…/†:SELECT
OK:CONFIRM SETUP:END
PR 04
RECEPTION AERIAL
AUTOSEARCH CH
_ _
FINE TUNING
DECODER ON
NAME
_ _ _ _
MANUAL SET
…/†:
UP/DOWN
œ/√:SELECT
OK:CONFIRM SETUP:END
PR 03
RECEPTION AERIAL
AUTOSEARCH CH 03
FINE TUNING
DECODER ON
NAME
_ _ _ _
MANUAL SET
…/†:
UP/DOWN
0/1: CHANGE/CREATE
OK:CONFIRM SETUP:END
PR 03
RECEPTION AERIAL
AUTOSEARCH CH
_ _
FINE TUNING
DECODER ON
NAME
_ _ _ _