Filter
Top Products
53
Recording
52
Copying and Assembling
COPYING
ASSEMBLING
Timer Recordings
TIMER REVIEW - CHANGING AND ERASING
Call the player’s "SETUP",
choose "TIMER PROGRAM".
1
Select the programming to change or erase.
If you want to erase this programming press button [0].
If you wish to make changes:
Move to the position you want to change using the
[
œ/√
] buttons.
Change the settings using the […/†] or [number]
buttons.
If all settings are ok, press [
œ
or
√
], until you see "OK:
CONFIRM" in the bottom line.
Confirm changes with [OK]. Exit the menus.
2
TIMER PROGRAM
PR START END DATE
03 21:20 22:20 14/06
01 18:10 20:30 20/06
-- -- : -- -- : -- -- / --
-- -- : -- -- : -- -- / --
-- -- : -- -- : -- -- / --
-- -- : -- -- : -- -- / --
-- -- : -- -- : -- -- / --
-- -- : -- -- : -- -- / --
…/†:SELECT
OK:CONFIRM SETUP:END
TIMER PROGRAM (ONCE)
PR 03
START TIME 21:20
END TIME 22:20
START DATE 14/06(SAT)
TAPE SPEED SP
VPS/PDC ON
0 :ERASE
œ/√:CORRECT SETUP:END
■ Switch off all components when connecting or disconnecting cables.
To copy to your player from another video machine,
connect the two machines with a cable between their
EURO AV (SCART) sockets and select as programme
"AV 1/AV 2" or “F. AV” (front sockets) using the
[PR/PRESET] or [INPUT] button.
Set the other video machine to playback and your
machine to record.
•To connect a mono audio source, use the front Audio In
socket marked L.
To copy to another video machine from your player,
connect the two machines by means of their EURO AV
(SCART) sockets.
On the other video, select its AV input and set the
machine to record.
Switch your player to play back at the position you want
copying to start.
TV
(other VCR)
Other VCR
Decoder for Pay-TV
Camcorder
Video Player
Satellite Receiver
Audio Amp.
devices
Should you wish to assemble your own film, from camcorder footage for example, use the assembly technique for smooth edit
points:
• Move the tape to the position at which the new scene is to be added using the play functions.
• Wind back slightly before the edit point and put the machine into pause using the [PLAY/PAUSE]
button (do not press STOP!).
• Now go directly into record.
For the best results, the source cassette from which you are recording should already be playing back
when you start recording.
* In case the unit operates in VCR or Radio mode, the timer recording function
can not be performed.