Filter
Top Products
31
VCR Operation DVD Setup
30
DVD initial setting
Connections
To the TV via antenna cable (if you are not using a SCART cable)
LANGUAGE Setup
While STOP or RESUME STOP, press
[SETUP] button.
1
Select “OSD Language” by pressing
[
……
/
††
] button.
Please select a language to be displayed on DVD
screen.
5
Select “Audio” by pressing [
……
/
††
]
button.
Set it as the preferred audio language. In case the
audio language is set and recorded in the DISC, it is
automatically played in the set language in every
playing.
2
Select “Subtitle” by pressing [
……
/
††
]
button.
Please set it as the preferred language. In case the
subtitle language is set and recorded in the DISC, it is
automatically played in the set language in every
playing.
3
Select “DVD Menu” by pressing [
……
/
††
]
button.
Please set it as the preferred DISC MENU language. In
case the DISC MENU language is set and recorded in
the DISC, it is automatically played in the set
language in every playing.
4
■ A user can set OSD language, Audio, Subtitle and Disc Menu.
In case a disc does
not include setting
languages information,
the selected language
does not appear.
“OSD” means
“On Screen Display”.
AudioDisplay Ratings
Language
Audio : Default
Subtitle : Default
DVD Menu : Default
OSD Language : English
Audio : English
Subtitle : English
DVD Menu : English
OSD Language : English
>Default
English
French
Spanish
Czech
Dutch
German
Hungarian
Italian
Russian
Audio : English
Subtitle : English
DVD Menu : English
OSD Language : English
Subtitles Off
>Default
English
French
Spanish
Czech
Dutch
German
Hungarian
Italian
Russian
Audio : English
Subtitle : English
DVD Menu : English
OSD Language : English
>Default
English
French
Spanish
Czech
Dutch
German
Hungarian
Italian
Russian
Audio : English
Subtitle : English
DVD Menu : English
OSD Language
: English
>English
French
Spanish
Czech
Dutch
German
Hungarian
Italian
Russian
AudioDisplay Ratings
Language
AudioDisplay Ratings
Language
AudioDisplay Ratings
Language
AudioDisplay Ratings
Language
■ If you are using a SCART cable, select the AV input on the TV to see the picture from the player.
■ If you are not using a SCART cable, select the button number on the TV reserved for video input to see the
picture from the player.
If you are not using a SCART cable, your player can transmit pictures and sound to the TV via the coax aerial cable. Just tune
the TV to the player's transmitting channel (factory set to UHF CH 52). Tune the TV carefully to ensure the best pictures and
sound.
Once you have carried out the steps in "Connecting up the player" , switch on your
TV.
Press the [OK] button of the player’s remote control longer than 5 seconds to call
the player´s test picture.
Tune the TV to the test picture using the channel pre-set functions of your TV as
described in its manual.
When you have found the test picture, store it under the button number on your TV
for player input.
Press the [OK] button of the player’s remote control again longer than 5 seconds to
release the test picture.
1
• If the quality of the test picture transmitted to the TV is poor due to interference
caused by a station transmitting on channel 52, you can tune the player to a
different transmitting channel. Find a free channel between 21 and 69 on your TV.
Call the player’s "SETUP" choose "VCR SETUP" then "RF
OUTPUT SET".
Type in the free channel.
Store and exit.
2
• If the quality of the test picture transmitted to the TV is poor, fine-tuning on the TV may help (refer to the
TV manual).
• Without a scart cable, you will not get stereo sound from a TV capable of stereo sound.
RF OUTPUT SET
0-9:SELECT (21-69)
OK:CONFIRM SETUP:END
CH 52