Daewoo DCR-9120 DVD VCR Combo User Manual


 
35
DVD Setup
34
RATINGS Setup
Entering a NEW password.
Input password display appears.
Enter a user’s password by pressing 4 [Digit] buttons.
2
Select “PARENTAL”by pressing [
/
]
button.
Press [ENTER] button to select the desired setting.
Then input password to enter into ratings screen.
It consists of 8 levels of parental control, violence,
sexual scene, strong sexual scene and others to
protect children from watching those scenes.
3
While STOP or RESUME STOP, press
[SETUP] button.
1
“Parental Lock”
activates only if
you set a password and
the unit goes into Lock
status. When the disc
has no parental function
even if the disc for adult
only, Parental Lock
doesn’t activate.
The initial
password is 3308.
In case you forget newly-
input password, you can
use 3308 as a password.
DVD initial setting DVD initial setting
Password : Unassigned
PARENTAL : 8 ADULT
Default : Reset
Password :
Password :
Unassigned
Unassigned
Limits : 8 - No Limit
Enter NEW password:
– – – –
Password :
Password :
Unassigned
Unassigned
Limits : 8 - No Limit
Enter password :
– – – –
Password : Unassigned
PARENTAL : 8 ADULT
Default : Reset
1 KIDS
2G
3PG
4 PG-13
5 PG-R
6R
7 NC-17
>8 ADULT
Select “Default”by pressing [
/
]
button.
Press [ENTER] button to select the desired setting.
* “Default : Reset” function is available to make
DVD setting go “Default”.
4
Password : Unassigned
PARENTAL : 8 ADULT
Default : Reset
>Reset
AudioDisplay Ratings
Language
AudioDisplay Ratings
Language
AudioDisplay Ratings
Language
AudioDisplay Ratings
Language
AudioDisplay Ratings
Language
To hear the test tone of speaker is set,
press [
/❚ ❚
] button.
5
Select “SPEAKER SETUP: DEFAULT”
between CENTER and SUB. W in the
Speaker Setup menu and press [ENTER]
button.
6
From Configuration 1 to 3 is
correspondent with the position of
speaker.
Select the proper configuration for your
speaker type.
7
• In case of using the supplied speaker without another purchasing, you
will get better result if you select default mode.
• In case of configuration 2 or 3, it is impossible to adjust the Level setting for the
Woofer (WF).
* Speaker type
• Small type : Speaker applied with high-pass filter. (supplied speaker)
• Large type : Speaker applied without high-pass filter.
The provided speakers are “small” type. Under the condition of the “Large” type
speaker setup, the “small” speakers will be exposed to damage.
Speaker Setup
LEFT
Speaker Setup : Default
Type: Small
Level: 0.0 dB
Delay: 0 ms
CENTER
Type: Small
Level: 0.0 dB
Delay: 0 ms
RIGHT
L. SURR. SUB. W R.SURR.
Type: Small
Level: 0.0 dB
Delay: 0 ms
Type: Small
Level: 0.0 dB
Delay: 5 ms
Type: Small
Level: 0.0 dB
Delay: 5 ms
Type:
On
Level: 0.0 dB
Select: … † œ √ Test Tone: /❚ ❚
Level: œœ √√ Delay: œœ √√
Speaker Setup
LEFT
Speaker Setup : Default
Type: Small
Level: 0.0 dB
Delay: 0 ms
CENTER
Type: Small
Level: 0.0 dB
Delay: 0 ms
RIGHT
L. SURR. SUB. W R.SURR.
Type: Small
Level: 0.0 dB
Delay: 0 ms
Type: Small
Level: 0.0 dB
Delay: 5 ms
Type: Small
Level: 0.0 dB
Delay: 5 ms
Type:
On
Level: 0.0 dB
Select: … † œ √ Test Tone: /❚ ❚
Level: œœ √√ Delay: œœ √√
Speaker Setup
LEFT
Speaker Setup : Default
Type: Small
Level: 0.0 dB
Delay: 0 ms
CENTER
Type: Small
Level: 0.0 dB
Delay: 0 ms
RIGHT
L. SURR. SUB. W R.SURR.
Type: Small
Level: 0.0 dB
Delay: 0 ms
Type: Small
Level: 0.0 dB
Delay: 5 ms
Type: Small
Level: 0.0 dB
Delay: 5 ms
Type:
On
Level: 0.0 dB
Select: … † œ √ Test Tone: /❚ ❚
Level: œœ √√ Delay: œœ √√
>Default
Configuration 1
Configuration 2
Configuration 3