Filter
Top Products
55
Radio Operation
54
Listening to the radio
■ Preset radio stations in the DVD receiver’s memory first (see “Presetting radio stations” on the previous page).
Press [FM/AM] button until AM or FM appears in the display window.
The last received station is tuned in.
1
Press [PR/PRESET] button repeatedly to select the preset station you
want.
Each time you press the button, the DVD receiver tunes in one preset station at a time.
2
Adjust the volume by rotating VOLUME on the front panel or pressing
[VOL-] or [VOL +] button repeatedly.
3
When listening the FM radio broadcasting, each time you press [AUDIO]
button, STEREO and MONO changes alternately.
4
To turn off the radio
Press POWER to turn the unit off or select another function mode (DVD, VCR, VIDEO 1 or VIDEO 2).
To listen to non-preset radio stations
• Use manual or automatic tuning in step 2.
• For manual tuning, press [TUNING] button repeatedly.
• For automatic tuning, press and hold [TUNING] button for about two seconds.
Presetting the radio stations
■ You can preset 50 stations for FM and AM. Before tuning, make sure that you have turned down the volume to the
minimum.
Press [FM/AM] button until the FM or AM appears in the display window.
And then every time you press [FM/AM] button, FM and AM changes alternately.
1
Press and hold [TUNING –/+] button for about two seconds until the
frequency indication starts to change, then release.
Scanning stops when the DVD Receiver tunes in a station.
2
Press [MEMORY] button.
A preset number will display in the display window.
3
Press [PRESET –/+] button to select the preset number you want.
4
Press [MEMORY] button again.
The station is stored.
5
To tune in a station with a weak signal
Press [TUNING –/+] button repeatedly in step 2 to tune in the station manually.
To clear all the memorized stations
Press and hold [MEMORY] button for about three seconds and “CLEAR ALL” appears in the display
window and then press [MEMORY] button again, the stations are cleared.