Filter
Top Products
16
ENGLISH
5
PART NAMES AND FUNCTIONS
(1) Front Panel
See page 3.
q
Power button
• Press once to turn the power on.
• Press again to set to the “OFF” position and turn the power
off.
• Set the power to the standby mode by pressing the POWER
OFF button on the remote control unit while the power is on.
• Turn the power on from the standby mode by pressing the
POWER ON button on the remote control unit.
w
Power indicator
• This indicator lights when the power is on and when the
power is in the standby mode.
e
Disc tray
• Load discs here. (See page 20.)
• Press the OPEN/CLOSE button
!8 to open and close the
disc tray.
• The disc tray is also closed when the PLAY button
r is
pressed.
r
PLAY button (1)
• Press this button to play the disc. (See page 38.)
t
SEARCH MODE button
•
Press this to change the search mode to search for groups
or titles, tracks or chapters when selecting sections of discs
directly using the number buttons or SKIP buttons.
y
STILL/PAUSE button (3)
• Press this button to pause images or music or to play
images frame by frame. (See pages 40, 41.)
u
STOP button (2)
• Press this to stop the disc. (See page 40.)
i
Skip button (8)
• Press this to move back to the beginning of the current track
(or chapter).
• Press again to move back to the beginning of the previous
track (or chapter). (See page 41.)
o
Skip button (9)
• Press this to move ahead to the beginning of the next track
(or chapter). (See page 41.)
!0
Slow/Search button (6)
• Press this to set the slow play mode and to search in the
reverse direction. (See pages 40, 41.)
!1
Slow/Search button (7)
• Press this to set the slow play mode and to search in the
forward direction. (See pages 40, 41.)
!2
PROGRESSIVE button
• Press to switch the progressive video output mode
between progressive and interlace.
(See psge 28.)
✽ This function does not work when a CD is playing.
!3
PURE DIRECT VIDEO button
• Press to switch the video output between on and off.
• When the power is turned off, the setting is restored to
the default value. (The default value is ON.)
!4
SRS TS button
•
Sets the virtual surround sound.
(Functions when playing DVD-videos or VCDs only. See
page 42.)
!5
PURE DIRECT DIGITAL button
• Press to switch the audio output between on and off.
• When the power is turned off, the setting is restored to
the default value. (The default value is ON.)
!6
PURE DIRECT DISPLAY button
• Press to switch the indicate in Display of the main unit
between on and off.
• When the power is turned off, the setting is restored to
the default value. (The default value is ON.)
• Even when the display is turned off, it lights for about 2
seconds when any button other than the DIMMER button
is pressed.
!7
Setting the playback area/layer of Super audio CD
(SUPER AUDIO CD SETUP)
• Switch the area/layer of the Super audio CDs played with
priority.
!8
OPEN/CLOSE button (5)
• Press this button to open and close the disc tray.
(See page 20.)
!9
Display
• Information on the disc that is currently playing is shown on
the display. (See page 17.)
@0
Remote control sensor