Filter
Top Products
29
ENGLISH
3
t
When “BLACK LEVEL” is selected:
DARKER
Reduces the standard level of the video output signal’s black level.
Set this if the image on the TV is far too bright.
LIGHTER (Factory default)
Sets the video output signal’s black level to the standard level.
y
When “PROGRESSIVE MODE” is selected:
MODE 1 (level detection mode)
(Factory default)
This is a mode for high precision detection of the source type from the
level of the video signals recorded on the DVD.
For DVDs on which the flag (identification signal) data is recorded
incorrectly, the picture quality may decrease when flag detection is
conducted.
This mode is effective in such cases.
MODE 2 (flag detection mode)
This is a mode for detecting the source type from the source flag
(identification signal) recorded on the DVD.
In dark scenes, distinguishing between video signals and noise signals
with level detection is difficult and the picture quality may decrease.
This mode is effective in such cases.
BLACK L EVEL
PROGRESSIVE MODE
EXIT SETUP
VIDEO SETUP
SELECT: DECISION:ENTER BUTTON
TV ASPECT
TV TYPE
VI DEO OUT
ST I LL MODE
DARKER
LIGHTER
✽
To exit the setup mode
Use the
ª
cursor button to select “EXIT SETUP”, then press the ENTER button. It is also possible to quit by pressing the SETUP button
on the remote control unit.
BLACK L EVEL
PROGRESSIVE MODE
EXIT SETUP
VIDEO SETUP
SELECT: DECISION:ENTER BUTTON
TV ASPECT
TV TYPE
VI DEO OUT
ST I LL MODE
MODE 1
MODE 2