Filter
Top Products
9
Connecting to different Sources/Devices
Video System
This display supports various input devices including component, composite and S-Video. To
learn how to connect these devices to the display, consult your device's manual.
Audio System
Connect your display to a stereo system to enhance your viewing experience.
To connect the display to an audio system, connect one end of the RCA cables to the input
blocks of your stereo system then connect the other end to the audio output blocks of the
display.
If you have a powered subwoofer (optional), use another RCA cable to connect the
subwoofer to the display.
Computer
To use the display as your computer's monitor, use the supplied VGA cable to connect the
display to your computer.
Setting up the Display
The integrated OSD menu lets you set up options for your LCD Display. When you turn on
the display for the first time, you need to set up certain options first.
Auto Search/ANTENNA or CATV (cable)
Auto Search lets you scan for all available viewable channels from your antenna or cable TV
system.
Press MENU then press f 3 times to select TV
sub menu.
Press d to highlight TUNER MODE then press
ENTER.
Select the source you want to scan; CABLE or
ANTENNA.
Select AUTO SEARCH and then press ENTER.
The display starts scanning for available
viewable channels.
NOTE: You can press MENU at any time to stop the
auto scan function.
Once auto scan is completed, all non-viewable
channels will be skipped during Up / Down tuning.