Filter
Top Products
33
© 2006 directed electronics
step 10
Testing the system
With all the previous steps completed, the operation of the
system can now be tested.
Close all the doors and press the button on the transmitter
to lock the doors, the system should flash the parking lights
once. Press the button on the transmitter to unlock the
doors. The parking lights should flash twice and the factory
disarm output will activate (if connected).
This completes the testing, if all functions do not work correctly
check your wiring against the manual and verify all connections.
If you still experience problems contact READY REMOTE
Technical Support at
11--880000--447777--11338822
.
PROG
PROG
ARM
ARM
DISARM
DISARM
PROG
PROG
ARM
ARM
DISARM
DISARM
➜
G21994_04-06.qxd 12/11/06 3:36 PM Page 33