Filter
Top Products
37
BASIC TV OPERATION
Basic POP Operation
1. Press the POP button on the remote control. The POP window appears on the screen.
2. Press the POP CH yz buttons to select the desired program for the window picture.
3. To remove the POP window, press the POP button again.
POP Problems?
•If you are channel surfing and the POP disappears, you may have tuned to a digital
channel. To view POP and the main picture, make sure that both the main and POP
channels are analog inputs, or signals. Continue changing the channel until you find
an analog (NTSC format) channel. The POP window will reappear.
Direct Ticket Previews
8:00 PM to 8:00 PM
NR-Not Rated
English(Stereo)
Ch 100 DTV
POP Not Viewable
4:3 Full
Sat 01/01/00 8:10PM
Family
Menu
TV
SAT
The message “POP Not Viewable” in the channel banner lets you know
that POP is not available on this channel and you should tune to
another channel.
•If you press POP and the POP box is grayed, you may have movie or TV rating limits
set. These limits may block your access to the POP channel. For information on
removing limits, see the section “Using the Profiles.”
•If the POP window disappears when closed captioning is displayed or you press the
MUTE button on the remote control, you have a conflict in your settings. You
cannot view POP when parental controls have blocked the current program or closed
captioning is displayed. In order to view POP, either unlock parental controls or
change the closed captioning setting.
The channel banner and the
message “POP Not Viewable” will
disappear after a few seconds, you
can refer to the POP message by
pressing the INFO button on the
remote control