Filter
Top Products
System Options and Preferences
64
CHANGING THE SIGNAL SOURCE
The Signal Source menu allows you to choose the source from which you would
like the signal to come: Antenna A, Antenna B, or DIRECTV or Video Inputs. The
same can be accomplished using the ANTENNA, DIRECTV, and INPUT buttons on
your remote control. If you misplace your remote control, use the front panel
buttons to access this menu and change the signal source.
To access the Signal Source menu:
1. Press MENU on the remote control to access the main menu.
2. Select System Options from the main menu.
3. Select Signal Source from the next menu.
Select the appropriate signal source.
4. Use the arrows and OK to select which source from which you would like to
receive a signal.
CHANGING THE SIGNAL TYPE
The Signal Type menu lets you choose whether you are receiving a signal from
cable TV or an off-air antenna. When you run Channel Search (see “Channel
Search” in this section for details), the TV automatically detects your signal and you
don’t have to specify it here. However, if you decide to change the source, you will
need to use the Signal Type menu. Note that if your signal source is coming from
DIRECTV, this menu will not be available.
Select whether you are receiving signals from an off-air antenna or cable.