Dish Network 5.0 Universal Remote User Manual


 
2
REMOTE CONTROL BASICS
This remote control gives you easy access to all the features of a DISH
Network satellite TV receiver. You can set up the remote to control the
satellite TV receiver and up to three other devices. These devices can
be a TV, a VCR or DVD player, and a third device.
MODELS SUPPORTED BY THIS GUIDE
This user’s guide supports the following remote control models as
shown on the label on the back of the remote:
5.0 - Infrared (IR) only. For use with appropriate IR-controlled
DISH Network receivers.
6.0 - Infrared/Ultra-High Frequency Pro (IR/UHF Pro). For use
with appropriate UHF Pro-controlled DISH Network receivers.
The 6.0 remote can be converted to one of three different remote
types used on a DISH Player-DVR 522 receiver:
With the blue 2 UHF Pro key installed, this remote
will operate the UHF Pro side of the DISH
Player-DVR 522 receiver. The remote comes with
this key already installed.
With the green 1 key installed (no UHF Pro
marking), this remote will operate the IR side
of the DISH Player-DVR 522 receiver. This remote
will look and work exactly like a 5.0 IR remote.
See instructions in Converting the 6.0 Remote.
With the green 1 UHF Pro key installed, this
remote will operate the side of the DISH
Player-DVR 522 receiver from a distance using
UHF Pro. See instructions in Converting the 6.0
Remote.
If you set up your DISH Player-DVR 522 to operate the
side using UHF Pro, the two UHF Pro remotes for
this receiver will interfere with each other when
operated at the same time. This may prevent the
remotes from operating the receiver momentarily.
8.0 - Infrared/Ultra-High Frequency Pro (IR/UHF Pro). For use
with appropriate UHF Pro-controlled DISH Network receivers.
text_dishpvr.fm Page 2 Tuesday, March 2, 2004 12:35 PM