Dish Network 5.0 Universal Remote User Manual


 
21
RECORD BUTTON
Press the RECORD button to record a program.
Note: You also use this button if you change the remote control
address. See Setting Up to Control the Satellite Receiver on page 5.
PICTURE IN PICTURE (PIP)
Press the PIP button to open the PIP window. To make the PIP
window larger, press this button again. Press the button a third time to
close the PIP window.
POSITION BUTTON
Press the POSITION button to move the PIP window to different
positions on the TV screen.
SWAP BUTTON
Press the SWAP button to swap the video in the main display with the
video in the PIP window.
RECOVER BUTTON
Use the RECOVER button if you accidentally change the channel or
video input on your TV and cannot get the picture back from your
satellite receiver. When you press the RECOVER button as described
in the following section, the remote control sends commands to your
TV to change channels or video inputs to try to get you back to
watching satellite programming.
Note: RECOVER only works if the remote control has been set up to
control the TV and/or VCR, if connected (see Setting Up to Control
Other Devices on page 8).
text_dishpvr.fm Page 21 Tuesday, March 2, 2004 12:35 PM