D-Link DGS-1210-24 TV Receiver User Manual


 
Configuration D-Link Web Smart Switch User Manual
1
1
5
5
4 Configuration
The features and functions of the D-Link Web Smart Switch can be configured for optimum use through the
Web-based Management Utility.
Smart Wizard Configuration
After a successful login, the Smart Wizard will guide you through essential settings of the D-Link Web Smart
Switch. If you do not plan to change anything, click Exit to leave the Wizard and enter the Web Interface.
You can also skip it by clicking Ignore the wizard next time for the next time you logon to the Web-based
Management.
IP Information
will guide you to do basic configurations in 3 steps for the IP Information, access password, and SNMP.
Select Static, DHCP or BOOTP, and enter the desired new IP Address, select the Netmask and enter the
Gateway address, then click the Next button to enter the next Password setting page. (No need to enter IP
Address, Netmask and Gateway if DHCP and BOOTP are selected.) The Smart Wizard is for the quick
setting in IPv4 environment.
If you are not changing the settings, click the Exit button to go to the main page of Web-
based Management. You can also tick Ignore the wizard next time check box to skip wizard setting when the switch
boots up
.
IP Information
Figure 4.1 – IP Information in Smart Wizard
NOTE: The Smart Wizard supports quick settings
for IPv4 network.