D-Link DGS-1210-24 TV Receiver User Manual


 
Configuration D-Link Web Smart Switch User Manual
3
3
2
2
Voice VLAN OUI Settings: This allows the user to configure the user-defined voice traffic’s OUI. An
Organizationally Unique Identifier (OUI) is the first three bytes of the MAC address. This identifier uniquely
identifies a vendor, manufacturer, or other organization.
There are some pre-defined OUIs and when the user configures personal OUI, these pre-defined OUIs must
be avoided. Below are the pre-defined voice traffic’s OUI:
OUI Vendor Mnemonic Name
00:E0:BB 3Com 3com
00:03:6B Cisco cisco
00:E0:75 Veritel veritel
00:D0:1E Pingtel pingtel
00:01:E3 Siemens siemens
00:60:B9 NEC/Philips nec&philips
00:0F:E2 Huawei-3COM huawei&3com
00:09:6E Avaya avaya
Default OUI: Pre-defined OUI values, including brand names of 3COM, Cisco, Veritel, Pingtel, Siemens,
NEC/Philips, Huawei-3COM, and Avaya.
User defined OUI: You can manually create a Telephony OUI with a description. The maximum number of
user defined OUIs is 10. It will occupy one ACL rule when selecting a user defined OUI by default, and to
configure one user-defined OUI will take extra one ACL rule. System will auto generate an ACL profile
(Profile ID: 51) for all the Voice VLAN rules.
Select the OUI and press Add to the lower table to complete the Auto Voice VLAN setting.
NOTE: Voice VLAN has higher priority than any
other features (including QoS). Therefore the
voice traffic will be operated according to the
Voice VLAN setting and not impacted by the QoS
feature.
NOTE: It is recommended setting the highest
priority for Voice VLAN to guarantee the quality of
VoIP traffic.
The Voice VLAN Port Settings page allows users to automatically place the voice traffic from IP phone to an
assigned VLAN to enhance the VoIP service. With a higher priority and individual VLAN, the quality and the
security of VoIP traffic are guaranteed.
VLAN > Voice VLAN > Voice VLAN Port Settings