Filter
Top Products
20 VCZ625
Watching a video CD
Displaying the playback status
Press the [P. TIME] button during playback.
➔When pressing the [P. TIME] button.
Each time you press the button, you can
switch between display (ON) and non-
display (OFF) of the playback status.
• Even when display of the playback status
is OFF, you can display the playback status
by operating the button.
• Depending on the playback status or disc,
the following indication may appear.
By pressing the button for 1 second or longer,
you can switch among time displays.
TRACK ELAPSED
TRACK REMAIN
Note:
• Depending on some discs, the [P.TIME] indication
may not be displayed on some scenes. Also, it may
occur that the P.TIME operation does not work.
When this happens, the indication “INVALID” will
appear.
On/off of Play Back Control
On video CDs equipped with Play Back Control
function, you can turn it on/off.
Press the [PBC] button.
➔Each time you press the button, you can
switch between on and off.
When the PBC is turned on or off, the disc
plays from the beginning.
The factory default setting of PBC is “ON”.
Playback control (PBC)
This control signal is recorded on a Video CD for
version 2.0 and used to control playback. Using
pre-recorded menu screens in the Video CD with
PBC, you can enjoy playback of software with a
simplified dialog function or software with search
function. You can also enjoy a still picture at high
or standard resolution.
When the PBC is turned on
The beginning of a disc is played if one of the
operations such as “SET UP”, “DISC SEL”,
“STOP” or “ACC ON/OFF” is performed.