Filter
Top Products
VCZ625 21
Listening to a CD
*This unit is a CD TEXT compatible model.
This unit supports the display of the DISC TITLE,
TRACK TITLE and ARTIST of the CD TEXT.
Note:
• This unit supports only CD TEXT in English. Also,
some character data may not be reproduced
properly on the display.
After disc selection, the play mode is automatically
engaged.
CD TEXT display
Stopping playback
Press the Stop [ ] button during playback.
➔Playback stops.
■ To resume playback
• Press the Play/pause [ ] button, and
playback resumes from the scene where
playback is stopped.
Pausing playback
Press the Play/pause [ ] button during
playback.
➔Playback pauses.
■ To resume playback
• Press the Play/pause [ ] button again,
and playback resumes.
Skipping a track (searching)
Press the TRACK up [ ]/ TRACK down [ ]
buttons.
➔Tracks are skipped, as many as the times
the button is pressed, and playback starts.
• Press the [ ] button, and playback
starts from the beginning of the next track.
• Press the [ ] button, and playback
starts from the beginning of the current
track. When this button is pressed again
within about 2 seconds, playback starts
from the beginning of the previous track.
Fast forward and fast rewind
Press and hold the Fast forward [ ] button or
Fast rewind [ ] button during playback.
➔Press and hold the button, and the playback
speed becomes 4-time faster first and then
8-time faster 3 seconds later. Release the
button, and the normal speed is restored.
Searching with a track number
This operation allows searching using the track
numbers recorded on the CDs.
1. Press the [SEARCH MODE] button during
playback.
2. Input the number of the track that you want to
play back with the ten-key buttons (0 to 9).
• To input the track number “12”, press “1”
of the ten-key buttons and then “2”.
Press “1”.
Press “2”.
3. Press the [ENT] button.
➔Playback starts from the scene of the input
track number.
• If the input track number does not exist or
searching with a track number is not
allowed, the following message appears to
invalidate the input.
Scan playback
This operation scans and plays back all tracks
recorded on the disc, the first 10 seconds for
each.
Press the [SCAN] button.
➔Press the [SCAN] button again, and scan
playback is turned off.