Filter
Top Products
Making connections
9
DX-24L200A12
Using DVI (same as HDMI but requires an audio
connection)
To connect a cable or satellite box using DVI:
1 Turn off your TV and all connected equipment.
2 Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3 Connect an HDMI-DVI adapter (not provided) to one
end of an HDMI cable (not provided), then connect it
to the DVI OUT jack on the cable or satellite box.
4 Connect the other end of the HDMI cable to the
HDMI1 jack on the back of your TV.
5 Connect a 3.5 mm audio cable (not provided) to the
PC AUDIO IN jack on the back of your TV and to the
AUDIO OUT jack on the cable or satellite box.
6 Turn on your TV, then turn on the cable or satellite
box.
7 Go through the setup wizard on page 17.
Using component video (better)
To connect a cable or satellite box using component
video:
1 Turn off your TV and all connected equipment.
2 Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3 Connect a component video cable (not provided) to
the COMPONENT IN/Y, PB, PR jacks on the back of
your TV and to the component video out jacks on
the cable or satellite box.
4 Connect an audio cable (not provided) to the L and
R audio jacks on the side of your TV and to the audio
out jack on the cable or satellite TV box.
5 Turn on your TV, then turn on the cable or satellite
box.
6 Go through the setup wizard on page 17.
Note
A DVI device must be connected to the HDMI1 jack.
If you connect a DVI device to the HDMI2 jack, you
will not hear any audio.
YP
B
P
R
L -
AUDIO
-
R
COMPONENT IN
ANT / CABLE
AV IN
VIDEO
HDMI 2 HDMI 1 / DVI VGA
PC / DVI
AUDIO IN
DIGITAL
OUTPUT
SERVICE
PORT
HDMI cable with
HDMI-DVI
adapter
3.5 mm audio cable
Cable or satellite box
Back of TV
75 ohm coaxial cable
YP
B
P
R
L -
AUDIO
- R
COMPONENT IN
ANT / CABLE
AV I N
VIDEO
HDMI 2 HDMI 1 / DVI VGA
PC / DVI
AUDIO IN
DIGITAL
OUTPUT
SERVICE
PO
RT
Back of TV
Component video cable
Audio cable
Cable or satellite box
Cables are often
color-coded to match
color-coded jacks.
75 ohm coaxial cable
DX-24L200A12_11-0584_MAN_ENG_V1.book Page 9 Wednesday, September 14, 2011 12:59 PM