Filter
Top Products
10
Making connectionsDX-26LD150A11/DX-32LD150A11
Notes:
• Do not mix different types of batteries.
• Do not mix old and new batteries.
• Remove batteries when they no longer have a charge. Chemicals may
leak into the battery compartment. Battery chemicals can cause a
rash. If chemicals leak, clean the battery compartment with a cloth.
• Remove the batteries if you do not intend to use the remote control
for an extended amount of time.
• Do not dispose of batteries in a fire. Dispose of them as hazardous
waste.
Aiming the remote control
To use the remote control:
• Point the remote control towards the remote sensor on the front
of your TV/DVD combo.
Notes:
• Do not expose the remote control to shock or liquids.
• Do not use the remote control in an area with high humidity.
• Do not place the remote control in direct sunlight.
• Do not place objects, such as furniture, between the remote control
and the remote sensor.
• The remote control may not work if direct sunlight or bright light
shines on the remote sensor. Either move your TV/DVD combo or
change the angle at which you use the remote control.
Programming a universal remote control
You can operate your TV/DVD combo with a new or existing universal
remote control.
To program your existing universal remote control:
1 To program your existing remote control to work with your Dynex
TV/DVD combo, see the table below for common codes. If you
have problems programming your remote, or need a different
remote control code, visit www.dynexproducts.com for the latest
remote control code information.
Codes for other remote controls are available online at:
http://www.dynexproducts.com/universalcontrolcodes.aspx
Tips:
• The brand name is often visible on the front of the universal remote
control, and the model number is often visible on the back.
• The codes shown above are common codes, but are subject to change.
Please refer to Dynexproducts.com for the most up to date codes.
2 Follow your universal remote control’s instructions to enter the
code you found in Step 1.
Tips:
• If your universal remote control has a code search feature, run a code
search to identify a code that matches your TV/DVD combo. See your
universal remote control’s instructions for details.
• If your universal remote control has a “Learn” feature, you can
manually program it using your TV/DVD combo remote to “teach”
the commands one at a time. See your universal remote control’s
instructions for details.
For more help, call technical support for your universal remote
control or set-top box manufacturer, or call the Dynex Customer
Care Center:
US & CA Market- 1-800-305-2204
Mexico Market- 01 800 - 926 - 3020.
Making connections
Before you make any connections:
• Check the plugs on the ends of cables to make sure that they are
the correct type before you try plugging them into jacks on the
TV/DVD combo.
• Make sure that all plugs are securely inserted into the jacks.
Loose connections can result in image or color problems.
13
654
789
0
2
TV DVD
RECALL
MTS/SAP
PICTURE
FAVORITETV MENU
INPUT GUIDE
CCD
OK
ENTER
EXIT
TITLE
MENU
SETUP
REPEAT
SUBTITLE
RETURN
AUDIO
INFO
A-B
ZOOM
AUDIO
16.4 ft (5m)
30°
30°
Dynex TV codes for universal remote controls
(for all Dynex TVs manufactured after Jan. 1, 2007)
Universal remote control manufacturer and model
Philips
PHDVD5,
PH5DSS,
PMDVR8,
PDVR8
RCA
RCU807
One for All
URC-6690
Sony
RM-VL600
115 135 0464 8043
Set-top box manufacturer and model
Comcast
M1057
Dish
Network
VIP508,
VIP622
Motorola
DRC800
TIVO
Series 3, HD
DirectTV
RC23
0463 720 0463 0091 10463
DX-26LD-36LD_09-1090.book Page 10 Wednesday, January 27, 2010 8:33 AM