Filter
Top Products
34
Computer Input
Vacant
Values of “Total dots”,
“Horizontal”, “Vertical”,
“Display area H”, and
“Display area V”.
Close this dialog box.
To store adjusted data
To clear adjusted data
This Mode has stored
parameters.
Move the red frame pointer
to the desired item and
press the SELECT button.
Use the Point ◄► buttons to adjust the horizontal area
displayed by this projector.
Display area H
Use the Point ◄► buttons to adjust the vertical area
displayed by this projector.
Display area V
Reset
Store
Exit the PC Adjust Menu.
Quit
To store the adjusted data, select Store and then press the
SELECT button. Move the red arrow pointer to one of the
Modes 1 to 5 in which you want to store, and then press the
SELECT button.
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
[Yes]. All adjustments will return to their previous figures.
Mode free
To clear the stored data, select Mode free and then press
the SELECT button. Move the red arrow pointer to the Mode
that you want to clear and then press the SELECT button.
Notes:
• Display area (H/V) cannot be selected when 480i, 575i,
480p, 575p, 720p, 1035i, or 1080i is selected in the PC
System Menu (p.31).
• PC Adjust Menu cannot be selected when Computer
1(Digital) is selected in the Input Menu (p.30).
Computer Input