Epson 5010E Home Theater Screen User Manual


 
46 Making Detailed Adjustments
Once you have finished making your selections for both screens, select Execute to exit
the Source menu and apply these settings.
Note: Certain combinations of sources can’t be selected. Invalid input combinations will be
grayed out. See page 28 for a complete list of available source combinations.
Swap Screens
Select this option to quickly switch the images on the left and right sides of the split
screen display.
Selecting Memory Settings and Resetting the
Projector
Your projector comes with 10 memory locations where you can save customized settings to
obtain the best picture quality for each of your video inputs.
Creating Memory Settings
Memory settings can be used to store most of the picture quality settings on page 38 and color
settings on page 39. Before saving them to memory, adjust the settings to the desired levels.
1. Press the
Memory button on the remote control.
2. Select
Save Memory.
3. Select the memory name you want to use, then press the
Enter button to save your
settings.
Note: Saved settings are indicated by a green highlight next to the memory name. If you select
a name that is already in use, the existing settings will be erased and new ones saved in their
place.
Split Screen Setup > Swap Screens