Filter
Top Products
66 Problem Solving
Problem Solving
This section explains how to interpret the projector’s status lights, solve problems with the
picture and remote control, and contact technical support.
What To Do When the Lights Come On
or Flash
The lights on top of the projector indicate the projector’s status and let you know when a
problem occurs.
If the projector isn’t working correctly, first press the P power button, let the projector cool
down, and unplug the power cord. Then plug the power cord back in and turn on the
projector. If this doesn’t solve the problem, check the status lights on top of the projector.
Note: If the power button and light don’t come on, they may have been turned off using the
Illumination setting (see page 51).
Lights indicating normal operation
Light state Cause and solution
All lights are off The projector is turned off.
Power light is off,
power button is on
The projector is in standby mode. Press the
Ppower button on
the projector or the
On button on the remote control to turn it on.