Filter
Top Products
Using Epson MovieMate with Other Equipment 29
Playing Epson MovieMate Audio Through an
External Audio System
You can connect MovieMate to an audio receiver, amplifier, 5.1 Stereo Surround Sound
System, or digital audio recorder. To output sound from MovieMate, the external equipment
needs to have an optical audio input port.
You will also need an optical digital cable, which may be provided with your external
equipment, or may be purchased from an electronics store.
1. Make sure the equipment is turned off, then connect the cable as shown:
2. Turn on your audio equipment and play your movie, music, or other presentation with
sound from MovieMate.
3. You may need to change the
Digital Output setting in the Audio Setup Page. Select All if
you are connecting a DTS/Dolby Digital Decoder or
PCM only if you are connecting to
equipment that is only compliant with linear PCM. For more information, see page 43.
You can also use any of MovieMate’s audio controls, as described on pages 18 and 21.
Optical digital cable
(not included)