Filter
Top Products
19
Play From: Select the time to begin the search by choosing the Date and Time.
Click on the “Play” button to start the search. The DVR will automatically begin to play the video selected. The
DVR will play the nearest time if there is no data at the selected time.
In search playback mode, pressing the “Stop” button will return to the search menu.
Record Time (Start): Displays the starting time of record data in the disk.
Record Time (End): Displays the end time of record data in the disk.
Click button to enter GPS search menu.
Click button to enter Event search menu.
Click button to go to live view.
3.4.2 GPS Speed Search
Click button to enter GPS search menu.
Figure 3-6 Search Menu – GPS Search
From: Select starting date and time
To: Select ending date and time.
Display Unit: If the speed is being recorded from the GPS receiver, the desired speed display units must be
selected. Select GPS speed unit from KPH and MPH. Selecting MPH converts the GPS signal to display speed in
miles per hour.
Select search format from Less Than, More Than, Inside Range and Outside Range.
Speed Limit: Set the GPS speed limit to be searched. If search format is a range, then set the values for both
ends of range.