Filter
Top Products
VN-Matrix 300 • Firmware, License Upgrades, and User Accounts 53
NOTES: z Performing the Activate function on the controller will cause the device
to reboot and as a result the upgrade file (in the temporary storage are) will
be erased. It is recommended, therefore, that you PREPARE all devices
first, after which the upgrade file will no longer be needed. Then perform the
Activate function on each device, commencing with the controller.
• The Activate function must be performed on the controller device first, such
that the new firmware is in control of upgrading the remaining devices.
• When performing Activate or Commit on the controller, the device will
reboot.
• This will cause temporary loss of the web interface, since this is provided by
the controller.
• Wait for 30 seconds to allow the device time to reboot, then refresh the
browser.
Uploading the Firmware File to the VN-Matrix 300 Controller
z Login to the web interface.
z From the Device List page, click on the VN-Matrix 300 device that you wish to upgrade.
z From the Device page, click the Upgrade tab. The Upgrade page will appear:
Figure 39. Upgrade Page
z Upload — Browse to the le that you wish to upload to the VN-Matrix 300 device. This
file is loaded to a temporary area of memory on the controller. The Controller can hold a
maximum of two upgrade files. If another is loaded then the oldest file is deleted.
z Select Firmware Version — Select the upgrade version to be used. Usually this is the
version that you uploaded in the step above.
z Committed Version — This is the current version that is loaded and running on the
VN-Matrix 300 device.
z Upgrade Version — This is the version that you are upgrading to.
z Device Upgrade Status — This reports the status of the upgrade process. One of
seven possible messages (states) will be reported.