Fisher PLC-XR70N Projection Television User Manual


 
COMPUTER IN 2
COMPUTER IN 3
VIDEO IN 3
CONTROL PORT 2
CONTROL PORT 3
AUDIO 2
AUDIO 3
(STEREO)
(STEREO)
VIDEO/Y
C/Cb(B-Y)
Cr(R-Y)
S-VIDEO
L-AUDIO-R
(MONO)
12
CONNECTING THE PROJECTOR
TERMINALS OF THE PROJECTOR
This projector has various kind of terminals to connect with peripheral equipment. Connect the projector with these
equipment before turning them on. (Refer to page 14 ~ 17 for connection.)
COMPUTER IN 1
VIDEO IN 1
VIDEO IN 2
CONTROL PORT 1
AUDIO 1
(STEREO)
S-VIDEO
VIDEO/Y
C/Cb(B-Y)
Cr(R-Y)
S-VIDEO
VIDEO
VIDEO(BNC)
R/C JACK
R-AUDIO-L
(MONO)
R-AUDIO-L
(MONO)
Rear Terminal
Front Terminal
COMPUTER IN 1
Connect the Computer output
to this terminal.
(Refer to page 14 and 15.)
AUDIO IN 1
Connect the Audio output from
the computer to this terminal.
(Refer to page 14 and 15.)
CONTROL PORT 1
When controlling the computer
with the Wireless Remote Control
of this projector, connect the
mouse port to this terminal.
(Refer to page 14 and 15.)
VIDEO IN 1, 2
Connect the Video and Audio
outputs from the video
equipment to these terminals.
C/Cb, and Cr terminals are
provided for component video
input, such as DVD player.
(Refer to page 16 and 17.)
u When the audio input of the
audio equipment is
monaural, connect it to the
left jack.
S-VIDEO
Connect the S-VIDEO output from
the video equipment to this
terminal.
(Refer to page 16.)
R/C JACK
When using the Wired/Wireless
Remote Control Unit as the Wired
Remote Control, Connect the
Wired Remote Control Unit to the
R/C JACK with the Remote
Control Cable (supplied).
(Refer to page 21.)
Connect the Computer outputs
to these terminals.
(Refer to page 14 and 15.)
AUDIO IN 2, 3
Connect the Audio
outputs from the
computers to these
terminals.
CONTROL PORT 2, 3
When controlling the computer
with the Wireless Remote Control
of this projector, connect the
mouse port to these terminals.
(Refer to page 14 and 15.)
Connect the S-VIDEO
output from the video
equipment to this
terminal.
(Refer to page 16.)
VIDEO IN 3
Connect the Video and Audio output from the video
equipment to these terminal. C/Cb, and Cr terminals are
provided for component video input, such as DVD player.
(Refer to page 16 and 17.)
u When the audio input of the audio equipment is monaural,
connect it to the left jack.
To use these terminals,
connection of the Mouse/
Keyboard Cable inside
the Storage Cabinet is
required.
(Refer to page 40.)
COMPUTER IN 2, 3
MOUSE / KEYBOARD S-VIDEO