Filter
Top Products
36
VIDEO MODE
PICTURE IMAGE ADJUSTMENT
Press the MENU button and the ON-SCREEN MENU will appear.
Press the POINT LEFT/RIGHT buttons to select IMAGE and
press the SELECT (REAR CLICK) button. Another dialog box
PICTURE IMAGE ADJUSTMENT Menu will appear.
Press the POINT DOWN button and a red-arrow icon will appear.
Move the arrow to or of the item that you want to change by
pressing the POINT UP/DOWN buttons. To increase the value,
point the arrow to and then press the SELECT (REAR CLICK)
button. To decrease the value point the arrow to and then
press the SELECT (REAR CLICK) button.
1
2
Adjusting the Picture Image
The normal picture level is preset on this projector by the factory and
can be restored anytime by pressing the NORMAL button (located on
the Front Control or on the Remote Control). The "Normal" display will
be displayed on the screen for a few seconds.
Normal Function
Normal
It terminates the
PICTURE IMAGE
ADJUSTMENT Menu.
Move the arrow to
or and press
the SELECT (REAR
CLICK) button.
It indicates the
roughly level of
the item.
Color
Point to to adjust the image lighter, and select
to adjust the image deeper. (From 0 to 63.)
Tint
Point to to adjust the color more purple, and select
to adjust more green. (From 0 to 63.)
Contrast
Point to to adjust the image lighter, and select
to adjust the image deeper. (From 0 to 63.)
Brightness
Point to to adjust the image darker, and select
to adjust the image brighter. (From 0 to 63.)
It recalls the data previously adjusted.
Reset
It stores the data in the memory.
Stored
It terminates the PICTURE IMAGE ADJUSTMENT
Menu.
Quit
sharpness
Point to to adjust the image softer, and select to
adjust the image sharper. (From 0 to 63.)