Filter
Top Products
26
COMPUTER MODE
SELECTING COMPUTER MODE
Direct Operation
Press the MODE button on the Front Control or the PC button on
Remote Control Units. Select the Mode among Computer1 to
Computer 3 corresponding with the input source. The display of
"Computer 1," "Computer 2," "Computer 3," "Video 1," "Video 2,"
or "Video 3"appears on the screen for a few second. (The
"Computer 1," "Computer 2," or "Computer 3" appears when
pressing the PC button.)
Menu Operation
Displaying the image from "Computer 1"
on the Rear Terminal.
Displaying the image from "Computer 2"
on the Front Terminal.
Displaying the image from "Computer 3"
on the Front Terminal.
Press the MENU button and the ON-SCREEN MENU will appear.
Press the POINT LEFT/RIGHT buttons to select Computer
and press the SELECT (REAR CLICK) button. Another dialog
box COMPUTER MODE
Menu will appear.
Press the POINT DOWN button and a red-arrow icon will appear.
Move the arrow to the mode among Computer1 to Computer3
that you want to select, and then press the
SELECT (REAR
CLICK) button.
1
2
When selecting the "Computer 1," "Computer 2," or "Computer 3"
Mode, the Current Mode display appears. It shows the information of
the computer of the mode selected.
CURRENT MODE DISPLAY
Computer 1
Computer 2
Computer 3
Computer 1
Computer 2
Computer 3
Video 1
Video 2
Video 3
MODE button PC button
Computer 1
Computer 2
Computer 3
Providing the
information of
the computer
detected by the
projector.
36 5
60 0
+ +