Filter
Top Products
69
Troubleshooting
www.gateway.com
Avoiding image burn-in
■ Displaying the same stationary patterns over extended periods of time,
such as black bars, stock tickers, video games, or shopping channel logos
and pricing displays, can leave a permanent ghost image (burn-in). Avoid
this by mixing your viewing patterns. Do not show the same stationary
image for more than 15% of your total TV viewing in any one week.
■ Your warranty does NOT cover screen burn-in.
Troubleshooting
Use the following information to solve common problems.
Symptom Possible Cause Remedy
No picture is displayed 1 The power cord is
disconnected.
2 The main power switch on
the back of your plasma TV
is not switched on.
3 The selected input source
has no connection.
4 Your plasma TV is in
standby mode while
connected to a computer in
RGB mode.
1 Plug in the power cord.
2 Make sure that the power
switch is switched on.
3 Connect an input source to
your plasma TV.
4 Press any key on your
computer keyboard.
Interference displayed on your
plasma TV or audible noise is
heard
1 You may be experiencing
interference from
surrounding electrical
appliances, cars,
motorcycles, or fluorescent
lights.
1 Move your plasma TV to
another location to see if the
interference is reduced.
Color is abnormal 1 The input source cable is
not connected correctly.
1 Make sure that the input
source cable is attached
correctly to the back of your
plasma TV.