Filter
Top Products
10
DVD Player + TV without A/V Input Jacks
(Good Picture and Sound Quality)
To Connect the DVD Player
If you do not have audio/video input jacks on your television,
you need to use an RF modulator, and a splitter.
1. Connect one end of the A/V cables to the Left Audio and the
Video outputs on the DVD player.
2. Connect the other end to the corresponding inputs on the RF
modulator.
3. Connect the off-air antenna or your cable signal to the
antenna input on the RF modulator (if it has one).
4. Connect the output from the modulator to the antenna input
on your television.
To Watch DVD
Tune your television to RF modulator output channel (the
modulator should have a CH 3/4 switch to indicate the output
channel).
NOTE:
• You may need to adjust the A/B switch on the RF modulator
to watch television programming.
R
VIDEO
AUDIO
L
ANT IN
TV
DVD
PLAYER
CABLE
OR
OFF-AIR SIGNAL
Audio (L)
Video
Ant In
RF Out
RF
MODULATOR
Consult the owner’s manuals of the
additional components you are
connecting for more detailed
connection information for those
particular components.
CAUTION
Do not stack electronic components
or other objects on top of the DVD
player. See Safety Information, inside
front cover.
CONNECTIONS